light curing material
| UV-CIPP(UV Cured-In-Place-Pipe) ultraviolet curing lining hose is made of light curing composite material, which is specialized in repairing sewage pipes, rainwater pipes and other drainage pipes. Ultraviolet light curing uses a drag method to drag a hose of material into an underground pipe. After hardening by UV curing technology, the existing pipe is lined with new pipe. |
| Scope of application
·Suitable for underground drainage pipes or channels; ·restoration object can be round, oval, egg-shaped, square and other special shapes; ·is applicable is usuallyDN150 ~ 1200mm, the maximum pipe diameter can reach DN2000mm mm; ·Single (usually) maximum repair length up200m, other lengths must be customized; |
|
process advantages ·has little impact on traffic and other living environment. Really100% trenchless lining repair without working pit excavation. ·construction has good controllability and short construction period. Pull-in position, curing the whole processCCTV monitoring; on-site curing speed average 1 m/min. ·construction of each section, regardless of pipe wall cleaning, pulling and curing only need 3 to 4 hours to complete. ·energy saving, high safety. The use of ultraviolet curing, low energy demand, no toxic gases or other harmful substances, to ensure that the construction personnel and construction the safety of people and protect the environment. ·The lining pipe has good sealing effect, strong corrosion resistance and long service life. ·The loss of current-carrying capacity is low, and the lining pipe with thinner wall thickness can be used (wall thickness3 to 12mm) to achieve a very high bending modulus of elasticity and bending and tensile strength. |
 |
